How To Fix Your PS4 Controller Flashing Blue

The PS4 is an incredible gaming console, but its controllers tend to act up sometimes. An example of this is the PS4 controller flashing blue.

This article may contain affiliate links where we earn a commission from qualifying purchases.

The PS4 is an incredible gaming console, but its controllers tend to act up sometimes. An example of this is the PS4 controller flashing blue.

If you've ever wondered why your PS4 controller is flashing blue, it's a pretty simple explanation. When the controller is turned on and connected to the console, it will flash blue to indicate that it's ready to be used. If the controller is disconnected or turned off, it will stop flashing blue. However, if the controller continues to flash blue for a long time, it is a sign that it isn't connecting.

Your PS4 controller flashing blue is a common issue that can be fixed by following some simple steps. You can reset the controller, restart the PS4, turn it off and then back on again, or even unplug the PS4 for 30 seconds and then plug it back in. If all else fails, your controller is faulty.

The controller is an important part of the PS4 - it’s how you control the system, after all. A faulty controller means you won’t be able to play games on the PS4 or even interact with the interface. Luckily, there are some tips and tricks that can help you troubleshoot and even solve this issue.

As PS4 owners, we’ve faced a number of issues with our controllers. We were able to solve a lot of these problems with some simple tips and tricks. Here, we’re going to tell you what to do when your controller starts flashing blue.

Table of Contents

Ways to Fix a PS4 Controller Flashing Blue

One of the most common PS4 controller issues is a flashing blue light. This typically indicates that the controller is not properly synced with the console. To fix this, simply turn off the PS4 and then turn it back on again.

Once it's turned on, hold down the PS button on your controller until it stops flashing. If this method doesn’t bring the controller to life, unplug the PS4 from its power source. Do this for 30 seconds before you plug it back in.

Once it's plugged back in, turn the PS4 on and try syncing the controller again. If the problem persists, first of all, make sure there's no dust or dirt on the controller’s Sync button.

If there is, clean it off with a soft cloth. You can also try connecting the controller to a different PS4 console to see if that works. If none of these things work, you will have to buy a new PS4 controller.

Reasons a PS4 Controller Flashes Blue

PS4 controllers can flash blue for a number of reasons.

  1. Sometimes, it’s simply because the battery is low and needs to be charged. Other times, it could be an indication that the PlayStation 4 console is overheating.
  2. If the PS4 controller flashes blue and won’t turn on, it could be due to a problem with the charging cable. Try using a different cable or plugging it into another outlet to see if that solves the problem.
  3. If the PS4 controller flashes blue and won’t connect to the console, it could be because it can’t establish a Bluetooth connection. Try restarting both the controller and the console, and ensure they are within range of each other.
  4. The PS4 controller can also flash blue when there’s an update available for the firmware. To check for updates, go to the Settings menu on your PS4 console and select “System Software Update.”
  5. If the PS4 controller flashing blue issue persists, it could be due to a hardware problem. In this case, you might need to get in touch with Sony customer support for further assistance.

Reasons a PS4 Controller Doesn’t Connect

One of the most frustrating things that can happen when gaming on a PlayStation 4 is when your controller suddenly won't connect. There are a number of possible reasons why this might happen, but luckily there are also some easy ways to fix it.

One common reason for disconnections is simply a low battery. If your controller is running low on power, it may not be able to maintain a connection with the console. Sometimes, the controller's Bluetooth signal is blocked by something in the way.

This could be something as simple as a nearby piece of electronic equipment or even your body. If you're having trouble connecting, try moving the controller and console closer together. Finally, if none of the solutions help, it's possible that the controller itself is defective.

In this case, the best course of action is to contact Sony for assistance. By troubleshooting your PS4 controller problems, you'll be back to gaming in no time.

Advanced Troubleshooting Techniques

Use Safe Mode

If your PS4 controller is flashing blue, it means that the controller is trying to connect to a PS4 console. The first thing you want to do is make sure that your controller is within range of your console.

If it is, the next thing you'll want to do is put your PS4 into safe mode. To do this, simply turn off your PS4 and hold down the power button until you hear two beeps. Once your PS4 is in safe mode, connect the controller to your PS4 via a USB cable and select "Rebuild Database." This will fix any corrupted data on your PS4 and should fix the problem with your controller.

Connecting the PS4 Hard Drive

Many gamers have faced the frustrating problem of their PS4 controllers flashing blue. In most cases, this indicates that the controller is not properly connected to the console. One thing you can do to troubleshoot this problem is to check the connectivity of the controller.

If the controller is connected to the console, the next step is to check the PS4 hard drive. Disconnecting the hard drive and reconnecting it to the PS4 can sometimes fix this issue. This is because the PS4 hard drive contains the firmware that is necessary for the controller to function properly.

If this does not fix the problem, you can try a few other options, such as resetting the controller or updating the firmware. However, if all else fails, it may be necessary to replace the controller.

Factors Affecting the Connectivity of Your PS4 Controller

Different factors can affect the connectivity of your controller. One of the most common is simply the distance between the controller and the PS4 console. The signal will be weak and unreliable if you are too far away.

Another factor is interference from other devices. If there are multiple wireless devices in close proximity to each other, they can cause interference that disrupts the signal. Additionally, metal objects can also interfere with the signal.

Finally, make sure that there are no obstructions between the controller and PS4, as this can also weaken the signal. If you keep these tricks in mind, you should be able to reconnect your controller to your PS4 and enjoy your gaming time.

If your PS4 controller is flashing blue, first, try to charge your controller. You can do this by plugging the controller into the PS4 with a USB cable, or you can use the PS4 controller charging dock (you have to buy this separately).

If that doesn’t work for you, the next best step is to restart your PS4. If neither of those solutions resolves the problem, you may need to buy a new controller. As always, if you can’t find a fix for your PS4 controller flashing blue, you may need to contact Sony.

Recent Articles

Subscribe To Our Newsletter

Thank you! You're signed up for our free newsletter!

Oops! Something went wrong while submitting the form